|
|
|
|
|
|
|
|
|
|
24" Dual Pass / 18" Single Pass |
Specialty Auto-Tech Coolers --- Made in USA
These are quality built, sturdy construction coolers. Compare these to the lightweight “cheap” offshore knock offs and you will see why S and S Classics Supply sells only Specialty Auto Coolers—Well worth the extra money to protect your equipment from costly repairs due to overheating issues. These coolers work. We sell them, we use them, we recommend them.
*Heat Sink Design has Internal (26" surface circumference) and External (35" surface circumference) cooling fins to transfer heat and minimize need for airflow. Cools better than conventional coolers when you need it most--- under 40 mph.
*Dual Pass center baffle increases cooling capacity over Single Pass by 40%!
*All welded construction 3" overall diameter. Mounts in tight places even frame rails away from heat sources and confined areas such as grills and radiators. Stands up to flying road debris and withstands pressures of 3000PSI
*Fluid Capacity ˝ Quart per 12"
*Reduces or eliminates damage to seals and varnishing of internal parts. May be used as stand alone or in addition to factory systems.
*Transmission Coolers available with 1/4" NPT. Available in 18", 24", 30" & 42" Lengths.
Dual Pass models Available in 12" 18" 24"
*Use transmission coolers on street rods, tow vehicles, RVs and off road vehicles.
*Used for transmissions, oil coolers, engine water coolers, gas and diesel fuel coolers street hydraulic and power steering.
*Also available in 6"and 12" Single Pass for power steering,
*Factory Satisfaction Guaranteed or money back!
*Standard finish is Satin, special finishes available.
|
| Size |
Application |
Price |
| 1801 |
1. SUPPLEMENTAL AUTO/LIGHT TRUCK
2. POWER STEERING HIGH FLOW PUMP |
$89.00 |
| 1801-2x |
1. AUTOMATIC TRANSMISSION STAND ALONE
UNDER 400HP AND 3000LBS. GVW
|
$119.00 |
| 2401-2x |
1.AUTOMATIC TRANS. STAND ALONE
OVER 400HP OR 3000LBS. GVW |
$129.00 |
| 3001 |
1. AUTOMATIC TRANS. SUPPLEMENTAL
COOLING LIGHT TRUCK/TOWING
2. COOLING SYSTEM: BIG BLOCK
|
$99.00 |
|
Polished finish add: |
$30.00 |
|
Radius Fin Coolers included in price |
|
| "This is Cool man", When Norm Grabowski found out how well our coolers worked, he installed one on each side of his "Kookie II Car"! |
|
|
|
|
|
|
 |
ZFU16S - 16" 3630 CFM ZIRGO
High Performance Radiator Cooling Fan
REV UP, & COOL DOWN! Zirgo's 16 inch "S" blade automotive cooling fans represents the ultimate in cooling technology. With a length of 16 inches, a height of 16.7 inches, and a depth of only 3.25 inches, the Zirgo 16 inch "S" blade cooling fan packs maximum performance into a minimum of space
|
16 inch "S" Blade Reversible Fan
- Four Point Mounting Bracket
- Quiet Motor
- Thin Design
- Fully Balanced Blades
- Plug-in Harness
- Sealed Ball Bearing High-torque Motor
- Lifetime Limited Warranty
|
|
ZFU16S - 16" 3630 CFM ZIRGO
High Performance Radiator Cooling Fan Price: $250.00 Sale Price $225.00
|
|
|
|
|
|
Chrome High Performance
Radiator Cooling Fan |
ZFB16S 3000 CFMs
High Performance Radiator Cooling Fan
REV UP, & COOL DOWN! Zirgo's 16 inch "S" blade automotive cooling fans represents the ultimate in cooling technology. With a length of 16 inches, a height of 16.7 inches, and a depth of only 3.5 inches, the Zirgo 16 inch flat blade cooling fan packs maximum performance into a minimum of space.
Zirgo high torque fan motors feature sealed ball bearings and fully balanced blades which insure low noise levels and a long life of smooth operation. To insure maximum performance, all Zirgo fans offer reversible blades allowing them to operate as pushers or pullers.
Zirgo's revolutionary four point mounting bracket insures easy placement for maximum performance on your vehicles cooling system. All high performance Zirgo fans offer plug-in color coded harnesses resulting in easy installation even for the “weekend” mechanic. All Zirgo high performance cooling fans are tested several times…and has Zirgo's limited lifetime warranty
|
16 inch S Blade Cooling Fan
- Four Point Mounting Bracket
- Quiet Motor
- Thin Design
- Fully Balanced Blades
- Plug-in Harness
- Sealed Ball Bearing High-torque Motor
- Warranty
|
|
ZFB16S 3000 - BLU 16S
High Performance Radiator Cooling Fan Price: $ 99.00
ZFB16S 3000 - BLU 16S CHR
Chrome High Perf Radiator Cooling Fan Price: $149.00 Sale Price $129.00
|
|
|
|
|
|
|
ZFB14S - 2122 CFMs
High Performance Radiator Cooling Fan
REV UP, & COOL DOWN! Zirgo's 14 inch "S" blade automotive cooling fans represents the ultimate in cooling technology. With a length of 14 inches, a height of 14.8 inches, and a depth of only 3.5 inches, the Zirgo 14 inch flat blade cooling fan packs maximum performance into a minimum of space.
Zirgo high torque fan motors feature sealed ball bearings and fully balanced blades which insure low noise levels and a long life of smooth operation. To insure maximum performance, all Zirgo fans offer reversible blades allowing them to operate as pushers or pullers.
Zirgo's revolutionary four point mounting bracket insures easy placement for maximum performance on your vehicles cooling system. All high performance Zirgo fans offer plug-in color coded harnesses resulting in easy installation even for the “weekend” mechanic.
|
14 inch S Blade Cooling Fan
- Four Point Mounting Bracket
- Quiet Motor
- Thin Design
- Fully Balanced Blades
- Plug-in Harness
- Sealed Ball Bearing High-torque Motor
- Warranty
|
|
ZFB14S - BLU 14S
High Performance Radiator Cooling Fan Price: $ 89.00
ZFB14S - BLU 14S CHR
Chrome High Perf Radiator Cooling Fan Price: $ 130.00
Sale Price $119.00
|
|
|
|
|
|
|
ZFB10S - 1019 CFMs
High Performance Radiator Cooling Fan
REV UP, & COOL DOWN! Zirgo's 10 inch “S” blade automotive cooling fans represents the ultimate in cooling technology. With a length of 10.7, a height of 11.1 inches, and a depth of only 2.2 inches, the Zirgo 10 inch “S” blade cooling fan packs maximum performance into a minimum of space.
Zirgo high torque fan motors feature sealed ball bearings and fully balanced blades which insure low noise levels and a long life of smooth operation. To insure maximum performance, all Zirgo fans offer reversible blades allowing them to operate as pushers or pullers.
Zirgo's revolutionary four point mounting bracket insures easy placement for maximum performance on your vehicles cooling system. All high performance Zirgo fans offer plug-in color coded harnesses resulting in easy installation even for the “weekend” mechanic.
|
10 inch “S” Blade Reversible Fan
- Four Point Mounting Bracket
- Quiet Motor
- Thin Design
- Fully Balanced Blades
- Plug-in Harness
- Sealed Ball Bearing High-torque Motor
- Limited Lifetime Warranty
|
|
ZFB10S - BLU 10S - 1019 CFMs
10 inch “S” Blade Reversible Fan - Price: $ 69.00
|
|
|
|
|
|
 |
ZFB9 839CFM
High Performance Radiator Cooling Fan
REV UP, & COOL DOWN! Zirgo's 9 inch flat Blade automotive cooling fans represents the ultimate in cooling technology. With a length of 9.5 inches, a height of 10.6 inches, and a depth of only 2.1 inches, the Zirgo 9 inch flat blade cooling fan packs maximum performance into a minimum of space. Zirgo high torque fan motors feature sealed ball bearings and fully balanced blades which insure low noise levels and a long life of smooth operation. To insure maximum performance, all Zirgo fans offer reversible blades allowing them to operate as pushers or pullers. Zirgo's ultra thin design and unmatchable performance, along with a limited lifetime warranty, make Zirgo the optimal fan for the ultimate vehicle.
|
9 inch Flat Blade Cooling Fan
- Four Point Mounting Bracket
- Quiet Motor
- Thin Design
- Fully Balanced Blades
- Plug-in Harness
- Sealed Ball Bearing High-torque Motor
- Warranty
|
|
ZFB9 - 9" 839 CFM ZIRGO
High Performance Radiator Cooling Fan Price: $ 69.00 |
|
|
|
|
|
 |
UHR and UHH
UltraHose™ Stainless Steel Radiator Hose and
UltraHose™ Stainless Steel Heater Hose Kits
DON'T COLLAPSE! The UltraHose™ has a strong corrugated structure that will not collapse or crack like typical rubber radiator hoses. The UltraHose™ Stainless Steel Hose Kit is available in 4 lengths; 12", 24", 36", and 48" for 1-1/4", 1-1/2", and 1-3/4" O.D. water necks. With this many sizes in one kit, the UltraHose™ is sure to fit almost any hot rod, street truck, muscle car, import or custom vehicle out there. The UltraHose™ Stainless Steel Hose Kit contains one UltraHose™ Flexible Corrugated Hose, two polished billet aluminum smooth hose ends, four stainless steel hose clamps, and two 1-1/2" and 1-1/4" neoprene reducers, along with 2 each- 1-3/4" high strength sleeve adaptors. Also available for heater hoses.
|
ZIRGO Ultra Radiator Hose
12” UHR 12 - Price: $ 55.00
24" UHR24 - Price: $75
36” UHR36 - Price: $85
48” UHR48 - Price: $129
With 4 end caps(to make two 24” hoses) Save $20
ZIRGO UltraHose™ Stainless Steel Heater Hose
48” UHH48 - Price: $99
|
|
|
|
|
|
|
Fan Temperature Switch
|
|
Fan Temperature Switch - Digital Price: $ 99.00
Fan Temperature Switch - Adjustable Price: $ 69.00
Fan Temperature Switch - Fixed 180° Price: $ 55.00 |
|
|
|
|
|
Call Now! To order your Radiator Fans and Coolers!
 |
|
|
|
|
Wiring Harness ||
Dolphin Gauges ||
Haneline Elite Gauges ||
Street Rod Gauges ||
New Gauges
Diesel Performance Products ||
Power Windows ||
Shave Door Kits ||
Fans & Coolers
Automotive Accessories ||
Automotive Carpet ||
Gardner-Westcott Bolt Kits ||
Home
|
